ad
ad

Arnott AMK Air Suspension Compressor Installation Video for BMW X5 (E70) and BMW X6 (E71)

Autos & Vehicles

Introduction

Proper installation of the Arnott AMK air suspension compressor is crucial for optimal performance in your BMW X5 (E70) and BMW X6 (E71). This guide will walk you through the necessary steps to ensure a successful setup. Before starting, it's essential to follow the necessary safety measures found in your vehicle's owner's manual. Additionally, ensure the vehicle is lifted, immobilized, and that any stored energy is isolated to prevent injuries or damage during the installation process.

Preparation Steps

  1. Set the Steering: Begin by setting the steering wheel to a straight position.

  2. Elevate the Vehicle: Raise the vehicle and safely remove the fasteners and paneling located under the vehicle's right side to expose the air suspension compressor valve block.

Removing the Old Compressor

  1. Disconnect Electrical Connectors: Locate and remove the three electrical connectors attached to the compressor valve block assembly.

  2. Detach Airlines: Locate and remove the two airlines leading to the valve block.

  3. Disconnect Rubber Hose: Find and disconnect the fitting on the larger rubber hose that runs forward from the compressor.

  4. Loosen Bracket Hardware: Loosen and remove the hardware holding the brackets for the four black tubes located directly underneath the compressor.

  5. Remove Mounting Nuts: Locate and remove the three nuts that secure the compressor assembly to the vehicle.

  6. Complete Removal: Carefully remove the compressor assembly from the vehicle, completing the removal process.

Installing the New Compressor

  1. Install New Compressor: Install the new Arnott AMK compressor in the reverse order of removal.

  2. Tighten All Fasteners: Ensure all nuts and bolts are tightened to the vehicle manufacturer's specifications to secure a proper fit.

Additional Inspection

  • Check Air Springs: Inspect the air springs for any cracks or excessive wear. Leaky air springs can lead to compressor overheating due to continuous operation.

By following these detailed steps, you can ensure the longevity and performance of your vehicle's suspension system. Stay safe and enjoy your repairs!

Keyword

  • Arnott AMK
  • Air Suspension Compressor
  • BMW X5 E70
  • BMW X6 E71
  • Installation
  • Safety Measures
  • Electrical Connectors
  • Airlines
  • Rubber Hose
  • Vehicle Manufacturer Specifications

FAQ

Q: What is the Arnott AMK air suspension compressor used for?
A: The Arnott AMK air suspension compressor is designed to maintain the air suspension system in the BMW X5 (E70) and BMW X6 (E71) for optimal performance and comfort.

Q: Why is proper installation important?
A: Proper installation ensures optimal performance and longevity of the air suspension system, reducing the risk of overheating and other issues related to improper setup.

Q: What safety measures should I take before starting the installation?
A: Consult your vehicle's owner's manual for necessary safety measures, including immobilizing the vehicle and isolating stored energy.

Q: Where can I find the installation specifications for my vehicle?
A: Vehicle specifications can be found in your owner's manual or by consulting with a certified BMW technician.

Q: How do I know if my air springs need to be replaced?
A: Inspect the air springs for cracks or excessive wear; any leaking springs can cause the compressor to overheat from continuous operation.