Build Flywheel Spring Machine Make Electricity Free Energy Generator 220v Perpetual Motion

Finally, this machine is going to run for a long time, and here I'm holding the camera in my hands to show you this perpetual motion running machine from all sides. I’m also going to move this machine from one spot to another to show you that I have not connected any wire. Plus, the video is also not in reverse. You can see that the camera is in my hands and I'm moving it here and there. Along with that, I’m also going to tell you some very important key points to consider while making such a machine. Note that the intro or the beginning of the video is not the final conclusion, so make sure for proper understanding of how things actually work, you have to watch the entire video including the middle portion as well as the ending part.

As you can see, I have not used any cut frames and the machine continues to operate without any stoppage. Plus, the floor is cemented, so it is not like I have tugged in a wire and connected it to the motor to run it from the home socket supply. This generator is 220 volts DC. Modifying this two-spring machine into a three-spring machine was quite simple, as you can see. I believe that I should have used a little stronger springs.

After this explanation comes the construction part, which will show you the size of the frame, the type of the spring, as well as the type of the motor or generator that I have used. Anyways, here I'm giving you a close-up of my machine which is still in operation from different sides to show you that I have not connected any wire and it continues to run without stopping.

Before making any negative or positive comments, make sure that you watch the full video so that you can make the right comment, not just based on the intro or the first few minutes of the video. This is very important because I’m one of those people who will definitely expose a fake video and not join the fake free energy community unless it actually works. If it works, it’s true, but if it’s false, then it is false. There is no middle ground.

This video was made considering the comments that I received on my previous video, which stated that the number of springs I used in my previous free energy flywheel perpetual motion machine was very few—there were only two. So here I’ve increased the number to three and given a separation of 120°. I have also connected a rope to this metal frame to prevent it from shaking. It works quite nicely in giving you a proper demonstration of such a project.

I got this DC generator from an old treadmill and it can actually generate electricity since it contains permanent magnets, as I showed you in part two, the previous video. Here I have not connected any power tools or loads, because this is part one of the video to show you the perpetual motion working. If the demand for this continues in the comments, then I’m going to do the next part which will include the operation of the power tools and machines. Otherwise, I’m going to end this perpetual motion project.

Now that you have seen all sides of the machines and corners, that no wire has been given, no supply has been connected, let's start with the construction part.

Machine

For this DC generator, here I have the meter pinouts and these two are the motor pinouts. I'm going to connect the meter pinouts to the DC generator. Done. Okay, keep watching the meter display here and... go! 109 volts DC was the maximum I could achieve here. So let’s install this generator piece to my free energy flywheel generator.

Time for the real truth as to why this machine is working continuously. Well, I don’t have to elaborate; you can actually watch it for yourself to see what has happened and how I actually faked it. This is how people are doing it, so please do not fall for it. I have been making videos, and many people are commenting that I have done something wrong in the video because of which my project is not working or not achieving the perpetual motion state.

Nobody can achieve perpetual motion because of added friction, air resistances, etc. It is never going to work except in a recorded and well-edited video. As I have already told you in my previous video on my Mr. Electron AM Exposed channel (where I upload videos in Hindi), I cannot reveal the real truth in the first part of the video, like in the first 2 or 3 minutes, because otherwise, a person is not going to watch the major portion of the video. It is important to signal to YouTube that people are taking interest in the video, and only then will YouTube promote this video so it can reach a wider audience. If I reveal the truth in the first 2 minutes, then the watch time or average view duration is going to decrease, and in that case, YouTube is not going to promote it to people. Even though I would have exposed a scam, the news is not going to reach a wider audience.

That’s all for today’s video. Hope you liked it and spread it to other people. Subscribe, hit like. Bye-bye!

Keywords

Perpetual motion machine
Flywheel
Free energy
DC generator
Spring machine
Mr. Electron AM Exposed
YouTube promotion
Scam exposure
Cemented floor
220 volts

FAQ

Q: Can a perpetual motion machine really work? A: No, due to added friction and air resistances, perpetual motion is not achievable.

Q: Why did you need to increase the number of springs? A: Based on comments from a previous video, it was suggested that two springs were too few, so I increased it to three for better demonstration.

Q: Why does the video have no cut frames? A: To show that the machine operates continuously without any hidden wires or external power sources.

Q: Where did the DC generator come from? A: The DC generator was salvaged from an old treadmill which contains permanent magnets.

Q: Why can’t the real truth be revealed in the first 2 minutes of the video? A: Revealing the truth instantly would lower watch time and average view duration, causing YouTube to not promote the video to a wider audience.

Q: What is the purpose of this video? A: To demonstrate the concept and later expose the truth about perpetual motion machines and free energy scams to a wider audience.