DTJ Z Semi Automatic Capsule Filling Machine Operating Video

Introduction

In this article, we will guide you through the operating procedure for the DTJ Z Semi Automatic Capsule Filling Machine. This machine is designed for efficient capsule filling with precision and ease.

Setting Up the Machine

1. Initial Setup:

   • Begin by pressing the turntable zero and sewing zero output buttons.
   • Once initialized, enter the parameter settings menu.

2. Setting Capsule Parameters:

   • For the zero capsule, there are six holes per row on the mold plate. Thus, the total output coefficient should be set to 6.
   • For other capsule sizes, the corresponding value should be set according to the number of holes in each row of the mold.
   • The inner cycle of the mold has 60 holes, so the capsule sewing count must be set to 60.
   • Set the number of locks to 1.

3. Finalizing Parameter Settings:

   • After configuring the parameters, place the mold plate in the designated position.
   • Ensure that the mold plate and stopper are tightly fitted against each other.

Operating the Capsule Filling Machine

1. Sewing Capsules:

   • Press the vacuum capsule sewing button to initiate the machine.
   • The operation will commence, and once the capsule sewing is complete, turn the mold plate a full circle and then remove it.

2. Filling Powder:

   • Position the capsule mold at the powder filling station, ensuring it is correctly aligned.
   • Remove the upper mold plate containing the capsule caps.
   • Press the filling button to start the powder filling process.

3. Securing the Capsules:

   • After the powder has been filled, replace the upper mold.
   • Remove the entire mold plate and position it on the capsule locking mechanism, ensuring it is securely placed.
   • Press both yellow buttons simultaneously to lock the capsules.

4. Final Step:

   • After the process is complete, check the locking effect of the capsules to ensure they are properly secured.

Conclusion

Following these steps will ensure that you effectively operate the DTJ Z Semi Automatic Capsule Filling Machine for optimal results.

Keyword

• DTJ Z
• Semi Automatic Capsule Filling Machine
• Capsule Parameters
• Vacuum Capsule Sewing
• Powder Filling
• Capsule Locking Mechanism

FAQ

Q1: What should I do if the capsule sewing count is not accurately set?
A1: Ensure that you have set the sewing count according to the number of holes in the inner cycle of the mold, which is 60 for the standard configuration.

Q2: How can I make sure the mold plate is correctly positioned?
A2: Ensure that the mold plate and stopper are tightly fitted together before starting the sewing operation.

Q3: What is the role of the yellow buttons in the final step?
A3: Pressing both yellow buttons simultaneously locks the capsules in place after filling and securing them.

Q4: Can I use different capsule sizes with this machine?
A4: Yes, but remember to adjust the output coefficient based on the number of holes per row on the mold for different sizes.