Great! Now What?!
People & Blogs
Introduction
This morning began with a sunny yet cool atmosphere on the farm. As we await a part for our grain leg from DHS Grain, which is currently experiencing an issue with the distributor, it offers us some time to conduct maintenance and prep on our tillage equipment.
I focused my attention on the Ripper, which I had already greased and checked the tires on the day before. Our immediate task was to replace a bent tine and perhaps a C shank, which is critical for the overall performance of the machinery. Carefully, I removed all spikes and extensions from the Ripper, although one piece was particularly stubborn and I chose to leave it until Dad arrived to avoid any injury.
Being cautious, I noticed that the tillage equipment was not as level as it should be, which could lead to uneven soil distribution during use. As I worked, Dad arrived from Midwest Machinery with the necessary parts, and we collaborated seamlessly to get everything back on track.
In our preparations, we also decided to clean out the honeybee soybean header. Our routine involved removing the drop pans and using a leaf blower to rid the equipment of accumulated debris. This not only prevents rust but also deters pests from taking refuge in the machinery as winter approaches.
We were keeping our fingers crossed for the grain leg, hoping for its repair soon, as it’s essential for our operation. In the meantime, we spent the day checking oil levels on the combine and assessing moisture content in our corn yield. Unexpectedly, the crop was drier than anticipated, thanks to an unusually warm September that allowed for optimal harvesting conditions.
As the day progressed, our combine setup showed promising signs, with minimal crop loss during harvesting. The clean tank and well-functioning equipment allowed us to prepare adequately for the busy days ahead.
As evening approached, communication from DHS informed us that the repairs were complete, signaling the end of a productive day and raising anticipation for tomorrow. It looks like we’ll be firing up the grain leg and dryer in the morning to kickstart the next phase of our harvest.
Keyword
Ripper, grain leg, maintenance, tillage equipment, soybean header, moisture content, corn yield, combine, harvest.
FAQ
Q: What was the main issue with the grain leg?
A: The grain leg had an issue with the distributor that required a specific part to be repaired.
Q: What maintenance was done on the Ripper?
A: The tines and a C shank were replaced, and the equipment was greased and checked for functionality.
Q: Why is it important to clean out the honeybee soybean header?
A: Cleaning the header prevents rust and discourages pests from nesting during winter.
Q: What were the moisture levels like for the corn crop?
A: The corn yielded unexpectedly low moisture levels, thanks to beneficial weather conditions in September.
Q: What are the next steps for the harvest?
A: We plan to fire up the grain leg and dryer in the morning to begin processing the harvested crop.