ad
ad

How to Connect Your Custom Domain to Systeme io

Education

Introduction

If you're looking to connect your custom domain to Systeme io, you've come to the right place. This guide will walk you through the process step by step. By following the instructions below, you can easily link your domain from providers such as Bluehost, Hostinger, or GoDaddy to your Systeme io account.

Step 1: Access the Systeme io Dashboard

  1. Log in to your Systeme io account. If you're on a blank dashboard, that's perfectly fine; it means you're ready to start.

Step 2: Navigate to Custom Domains

  1. In the left sidebar, click on Settings.
  2. Scroll down to Custom Domains and click on it.
  3. You'll see a default domain provided by Systeme io. It's time to add your custom domain.

Step 3: Add Your Custom Domain

  1. Click on Add a Domain in the top right corner.
  2. When prompted, enter your domain starting with www. For example, if your domain is "example.com", you should enter "www.example.com".
  3. Once entered, click Save.
  4. You will then be presented with DNS configurations that need to be entered into your domain hosting provider.

Step 4: Configure Your DNS Records on Bluehost

  1. Open your Bluehost account and navigate to the left sidebar.
  2. Click on Domains, then scroll down to Advanced Tools.
  3. Click on Manage under the Advanced DNS Records section.
  4. Here, you'll be able to enter your DNS records.

Adding the CNAME Records

  1. Click on Add Record.
  2. Select CNAME as the type of record.
  3. In the Host field, enter www.
  4. Return to Systeme io to copy the required CNAME value and paste it in the Points To field.
  5. Remove any trailing dot (.) if present, as it may cause issues.
  6. Set the TTL to 4 hours and click Add.

Now, repeat these steps for the second CNAME record:

  1. Click on Add Record again and select CNAME.
  2. In the Host field, this time enter the secondary host provided by Systeme io.
  3. Return to Systeme io, copy the corresponding CNAME value, and paste it.
  4. Set the TTL to 4 hours and click Add.

Step 5: Verify Your DNS Configuration

  1. After adding your CNAME records, you may want to verify that they have been properly configured.
  2. Use a DNS checker tool (as directed in the Systeme io interface) to confirm that your DNS records are correctly set up.
  3. Enter your full domain and change the query type to CNAME, then click Search.
  4. Look for a green checkmark indicating success. If there are any errors, review your DNS entries.

Step 6: Final Steps

After your records are set, be patient. It may take 24 to 48 hours for changes to propagate. Once everything is successfully linked, you will see a "ready to use" label in Systeme io where it previously indicated "pending validation". You can now use your custom domain when creating funnels or blogs in Systeme io.

If you found this guide helpful, please consider sharing it!

Keyword

  • Systeme io
  • Custom Domain
  • DNS Configuration
  • CNAME Records
  • Bluehost
  • Domain Hosting

FAQ

Q1: How long does it take for the DNS changes to propagate?
A1: It usually takes 24 to 48 hours for DNS changes to propagate.

Q2: What if I see an error in the DNS Checker?
A2: If there's an error, double-check your DNS entries for any mistakes and ensure that you have entered the correct CNAME values.

Q3: Do I need to remove the dot at the end of the CNAME?
A3: Yes, it’s recommended to remove the trailing dot, as it may cause issues if left in.

Q4: What should I do if I want to connect a domain I bought from another provider?
A4: You can follow similar steps using the configuration settings provided by your domain registrar, adjusting where necessary based on the specific interface of that provider.