MI TRIMMER 1C BLADE BROKEN PROBLEM 100% SOLVED| BEST TRICK| SAVE ₹500| INFO EVE

Introduction

If you own a MI Trimmer, particularly the model B313, you might encounter issues with the blade over time. Many users, including myself, have experienced problems where the blade becomes damaged and affects its performance. In this article, I will guide you through a simple yet effective solution to this problem, saving you from spending unnecessary money on replacements.

Understanding the Mechanism of the Trimmer Blade

The first step in resolving the issue is understanding how the trimmer blade works. The blade is designed with two parts, often referred to as 'blades' or 'plates,' that are connected by a pin. These components work together to cut hair efficiently.

Upon closer inspection, you will notice that the blades operate in tandem. They rely on springs that enable smooth movement. If these springs are compromised due to a broken connection, the blades cannot function properly, resulting in ineffective hair trimming.

Identifying the Problem

When the blade of your MI Trimmer becomes damaged, it may break while in use. One common issue arises when the plastic component that holds the connection between the blades becomes fractured, causing them to move erratically. In turn, this leads to uneven hair cutting or complete operational failure of the trimmer.

I experienced this firsthand and reached out to multiple service centers in Patna. Unfortunately, I learned that replacement blades were only available at service centers and were hard to find online, such as on Flipkart or Amazon. The cost for the complete assembly was around ₹900, while the replacement for just the blade was approximately ₹500. What was even more frustrating was the unavailability of these parts.

The Simple Solution

If you find yourself in a similar situation, there's no need to despair. Here, I’d like to share a simple DIY trick that can save you money without requiring you to buy a new blade or trimmer.

Gather Materials: You will need a folded piece of paper.
Preparation: Take the piece of paper and carefully fold it into a shape that can fit inside the trimmer's mechanism. This folded paper will act as a support structure.
Installation: Place the folded paper within the trimmer where the broken plastic used to be. This will create enough tension to hold the blades together.

After doing this, you will notice a significant improvement in the functionality of your trimmer. The blades will remain tightly in place, allowing them to work effectively once again, just like before.

This easy fix will eliminate the need for expensive replacements, thereby saving you around ₹500.

Conclusion

In conclusion, if you're experiencing issues with your MI Trimmer’s blade, consider trying this simple trick before opting for a costly repair or replacement. A little creativity can go a long way in keeping your trimmer functional at a fraction of the cost.

If you found this guide helpful, please give it a thumbs up. This is my first video, and I appreciate your support. Don't forget to like and subscribe for more content like this. Thank you!

Keywords

MI Trimmer
B313
Blade problem
Broken blade solution
Save money
DIY fix
Hair cutting
Service center issues
Replacement parts

FAQ

1. What should I do if my MI Trimmer blade is damaged?
If your blade is damaged, you can try fixing it with a simple DIY method using a piece of folded paper as a temporary support.

2. How much does it cost to replace the blade of a MI Trimmer?
Replacing the blade typically costs around ₹500, while the entire assembly can cost approximately ₹900.

3. Where can I find replacement blades for my MI Trimmer?
Replacement blades are usually available at service centers, but may not be readily available online.

4. Will the DIY fix really work?
Yes, many users have reported success with this method, allowing the trimmer to function effectively without the need for expensive replacements.

5. Is there a risk of damaging my trimmer further by trying to fix it?
As long as you carefully follow the instructions and do not force any components, the risk of further damage is minimal.