POWMR MPPT Solar Charger Controller Regulator Review #mpptchargecontroller #solarsystem #solarpower
Education
Introduction
Recently, I invested in a new solar regulator, hoping to upgrade from my old one. My previous regulator had become unreliable, often providing inaccurate voltage readings, which prompted the switch. After researching options, I settled on the POWMR MPPT Solar Charger Controller, lured by its promising features and attractive packaging.
Upon connecting the new regulator, I was initially excited. The design looked impressive, and I had high expectations of functionality. Unfortunately, things took a turn for the worse. The regulator immediately began overcharging my batteries, pushing the voltage up to 15 volts. This is a dangerous level for battery health and can lead to severe issues.
I had hoped that this new regulator would maintain a steady charging cycle – boosting charge, setting the voltage to around 13.6 volts, and then entering float mode. However, it continually remained in boost mode, leaving me frustrated with a system that was not performing as advertised.
Despite the good reviews I read online, my experience has been disappointing. It became clear that sometimes the lure of a cheap product can lead to bigger headaches, especially in systems dealing with sensitive equipment like batteries.
I've learned my lesson and will be more cautious with future purchases. If anyone else has had positive experiences with the POWMR regulator, I would greatly appreciate your input. Sharing your setups or any tips that helped you get the regulator functioning correctly would be incredibly beneficial.
Keywords
- POWMR MPPT
- solar charger controller
- regulator
- overcharging
- voltage
- battery health
- solar power
- caution in purchases
FAQ
1. What issues did you face with the POWMR MPPT regulator?
I encountered problems with overcharging where the voltage spiked up to 15 volts, which is harmful to battery health.
2. What were your expectations when you purchased the new regulator?
I expected the new regulator to charge the batteries effectively, setting the voltage around 13.6 volts and transitioning to float mode afterward.
3. Did you read any reviews before purchasing?
Yes, I did read several positive reviews online, which contributed to my decision to buy the POWMR MPPT regulator.
4. What lesson did you learn from this experience?
I learned to be cautious about purchasing cheap regulators and to thoroughly research products even with positive online reviews.
5. Are you still looking for solutions to make the POWMR regulator work?
Yes, I am seeking assistance from others who may have successfully used this regulator to see if there are settings or adjustments that could help manage the overcharging issue.