PRONTO - DEUTSCHE - How To Set Up Your Printer

Science & Technology

Introduction

Setting up your new Pronto printer is a straightforward process. Follow these step-by-step instructions to get your printer ready for use.

Step 1: Open the Printer

  1. Begin by opening the lid of your new Pronto printer.

Step 2: Insert the Die Film

  1. Take the new die film that came with your printer and place it inside the printer as shown in the instructions.

Step 3: Close the Lid

  1. After placing the die film, close the lid securely.

Step 4: Install the Driver

  1. Now, it’s time to install the driver for your printer.
    • Go to wwm AG Card.
    • Click on “Support”.
    • Select the printer that you are using.
    • Search for the driver that matches your model.
    • Download the driver and follow the on-screen instructions to complete the installation.

Step 5: Register Your Printer

  1. Once the driver installation is complete, you will be prompted to register your printer. It is highly recommended to do this so that you can take full advantage of the Magic Card warranty.

Step 6: Connect the Power Supply

  1. Remove the label located at the back of your printer and connect the USB cable and power supply.

Step 7: Power On the Printer

  1. Check that the power light turns green, indicating that your printer is ready for use.

Step 8: Connect to Your Computer

  1. Connect the USB cable to your computer.

Step 9: Verify Printer Connection

  1. On your computer, go to the Start menu, then select Control Panel, followed by Devices and Printers.
    • Find your printer thumbnail, right-click on it, and select "Printing Preferences".
    • Check your printer’s connectivity by selecting "Printer Status".

Once these steps are completed, your Pronto printer is set up and ready for use.

Keywords

  • Pronto printer
  • Setup
  • Die film
  • Driver installation
  • Register printer
  • Power supply
  • USB connection
  • Printer status

FAQ

Q: How do I open the Pronto printer?
A: Simply lift the lid of the printer to access the interior.

Q: Where do I find the correct driver for my Pronto printer?
A: Visit the wwm AG Card, navigate to the 'Support' section, select your printer model, and download the corresponding driver.

Q: Is it necessary to register my printer?
A: Yes, registering your printer is highly recommended to fully benefit from the Magic Card warranty.

Q: What do I do if the power light does not turn green?
A: Ensure that the power supply is correctly connected and the outlet is functioning. If the issue persists, check for troubleshooting assistance in the user manual.

Q: How can I check if my printer is connected to my computer?
A: Go to the Start menu, select Control Panel, then Devices and Printers. Right-click on your printer icon, and choose "Printer Status" to verify the connection.