Why Is this AIRGOO AG-326 Compressor so GOOD!! Review

Introduction

I was recently contacted by AIRGOO and asked if I would like to evaluate one of their new compressors. Today, I’m sharing my impressions of the AIRGOO AG-326 piston-type air compressor. This compressor bears a striking resemblance to another model I own, the Fener compressor.

Specifications

The AIRGOO AG-326 is a piston-type air compressor boasting a power output of 125 watts. Here are some of its specifications:

Flow Rate: 20 to 23 liters per minute
Auto Start Pressure: 3.5 bar (50.75 PSI)
Auto Stop Pressure: 4.5 bar (65.25 PSI)
Weight: 4.85 kg
Air Tank Capacity: 3 liters
Size: 325 x 545 x 310 mm
RPM: 450
Voltage: 220 to 240 volts

The compressor is equipped with a three-pin plug attached to the handle. However, it's worth noting that it doesn't come with any pipes or fittings, which means I had to remove the hose from my existing compressor to test it out.

Setting Up the Compressor

To begin testing, I plugged in the compressor and adjusted the pressure settings. I initially set the pressure to 15 PSI, which is sufficient for my needs. The AIRGOO compressor has the capability to operate up to approximately 60 PSI in the tank, making it versatile for various applications.

The system includes a moisture trap, allowing for easy drainage of accumulated moisture by pressing a button. There's also a drain valve at the base for any water that collects in the tank.

Performance

After adjustments, I attached the AIRGOO compressor to their Deluxe Airbrush series. I filled the airbrush with some Outlaw Paint’s lemon yellow and tested the spray. The results were impressive, showcasing smooth and even coverage.

During use, the compressor became slightly warm, which is expected for such devices; however, it worked flawlessly with no malfunctions. I found the noise level manageable, and compared to my Fener compressor, there wasn’t a significant difference in sound.

Price Comparison

I took a look at various models on Amazon. The AIRGOO AG-326 is currently priced at £86.59, while the Fener compressor, which I previously purchased, retails for around £83.93. Both models have a comparable specification, including a 3-liter tank and regulators. The AIRGOO compressor has received positive reviews, with an average rating of 4.6 out of 5 stars.

I also compared the noise levels. The Fener compressor indicates a noise level of 47 DB, while AIRGOO claims 60 DB. However, both sound similar in practice.

In terms of weight, the AIRGOO compressor is lighter at about 6 kg compared to the Fener's 11.02 kg. The AIRGOO model also has two cooling fans, which may enhance its longevity and efficiency.

Conclusion

Overall, I am pleased with the AIRGOO AG-326 compressor. Its modern design, consistent performance, and additional cooling fans make it a worthy competitor in the market. If you're looking for an efficient air compressor for airbrushing or other applications, the AIRGOO AG-326 is worth considering.

If you're interested in purchasing either the AIRGOO AG-326 or the Fener compressor, I will leave links for both options. Thank you for reading, and if you have any questions or comments, feel free to leave them below!

Keywords

AIRGOO, AG-326, air compressor, piston type, airbrush, pressure settings, moisture trap, noise level, Fener compressor, Amazon

FAQ

1. What is the AIRGOO AG-326's power output?
The AIRGOO AG-326 has a power output of 125 watts.

2. What is the flow rate of the AIRGOO AG-326?
It has a flow rate between 20 to 23 liters per minute.

3. Where can I purchase the AIRGOO AG-326?
The AIRGOO AG-326 is available on Amazon and through other online retailers.

4. How much pressure can the AIRGOO AG-326 hold?
The compressor can auto-start at 3.5 bar and stop at 4.5 bar (approximately 50.75 to 65.25 PSI).

5. How does the noise level compare to other compressors?
The AIRGOO AG-326 has a rated noise level of 60 DB, which may be slightly louder than some models but is manageable in a work environment.